Which solution provides the greatest location accuracy?

Correct Answer:D

What are two functions of Mist Radio Resource Management (RRM)? (Choose two.)

Correct Answer:AC
Mist Radio Resource Management (RRM) performs several functions including transmit power control and channel assignment which help optimize wireless network performance by dynamically adjusting radio settings based on changing environmental conditions.So,the correct answers are A.transmit power control and C.channel assignment
According to the Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide1, two functions of Mist Radio Resource Management (RRM) are:
Transmit power control, which adjusts the transmit power of APs based on their coverage area and interference level.
Channel assignment, which assigns channels to APs based on their location and interference level.
[References: https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-2/config-guide/b_wl_17_2_cg/radio_resource_management.html, , ]

Click the Exhibit button.
Referring to the exhibit, which percentage of connection attempts failed on the access point named LD_RS_Support?

Correct Answer:B
The 37% of Successful Connects suggest that 63% failed – however, these are spread between both LD_Testbed_MD and LD_RS_Support. If the only AP with connection issues was LD_RS_Support then the reverse math may have worked.

According to Juniper Networks, it is recommended that devices using Mist location-based services (LBS) have line-of-sight to how many APs?

Correct Answer:B
InJuniper Networks Mist AI Wireless, accurate location-based services (LBS) depend heavily on proper RF design and access point density. Juniper recommends that devices participating in Mist LBS maintainline-of-sight (LoS) to at least three access pointsto achieve reliable and consistent location accuracy.
Mist location services use advanced techniques such asRSSI triangulation,virtual BLE (vBLE), andAI-driven probability surface modelingto calculate a device??s position. These algorithms require multiple independent signal measurements to accurately determine a device??s X,Y coordinates. With signals received fromthree or more APs, Mist can triangulate the device position effectively and minimize errors caused by multipath reflections, attenuation, or transient RF noise.
If a device has line-of-sight to only one or two APs, the system lacks sufficient spatial diversity to calculate a precise location. This can result in ambiguous positioning, reduced accuracy, or excessive location ??drift.?? While additional APs (four or more) can further improve accuracy and stability—especially in high-value use cases such as asset tracking or wayfinding—three APs is the recommended minimum baselinefor dependable LBS performance.
Mist??s AI continuously evaluates signal quality, AP geometry, and environmental factors to refine location estimates, but it cannot compensate for insufficient AP visibility. As a result, Juniper best practices for LBS design emphasize:
Proper AP placement and height
Adequate AP density
Ensuring devices can ??see?? at least three APs at all times
The other options are incorrect because:
One or two APsdo not provide enough data for reliable triangulation.
Four APsmay improve accuracy but are not the minimum recommendation.
Therefore, the correct answer isB. 3.

You discover that some clients do not use all channels in the 5 GHz UNII-2 Extended frequency band and you have made the appropriate adjustments in the RF template. How do you implement these changes?

Correct Answer:A

You are deploying multiple Mist APs across many sites in your network. You must ensure that you can group similar devices together to easily apply consistent WxLAN policies across multiple sites.
Which configuration object should be used to accomplish this behavior?

Correct Answer:B
When deploying multiple Mist APs across many sites in your network and grouping similar devices together to easily apply consistent WxLAN policies across multiple sites, you should use device profiles.